, ,
Home | Courses | CERTIFICATE II in AUTOMOTIVE TYRE SERVICING TECHNOLOGY

CERTIFICATE II in AUTOMOTIVE TYRE SERVICING TECHNOLOGY

National ID: AUR21916 | State ID: BAF6

 

Training Package Version:Release 3.0

This qualification reflects the role of individuals who perform a range of tasks on tyres in the automotive retail, service and repair industry. Prospective students should be suitably experienced as part of the qualification is assessed via Recognition of Prior Learning methods. Additionally, you will be required to attend a five day training block at our Kalgoorlie Campus.

Licensing and Legislation

Upon successful completion of this qualification you will be able to apply for a Motor Vehicle Repairers Licence in the categories of TFL (Tyre Fitting Light) and SSW (Steering, Suspension and Wheel Alignment).

VET Student Loans

This course IS NOT eligible for a VET Student Loan.

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II
Study pathway
Job opportunities

Your qualification prepares you for roles such as:

You may choose to progress to an Apprenticeship Pathway after completion of this qualification.

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview

Course Overview

Where Kalgoorlie
Duration

5 Days face to face with additional assessment time

HowFace To Face (Class Room)
Recognition Of Prior Learning
WhenAvailable Semester 1
Fees and charges

Please contact the college to receive an indicative price for this course.

The fees identified above for this course are (predominantly) based on full-time face-to-face delivery (or Apprenticeship/Traineeship delivery) for this course. Fees may vary depending on your choice of units and some delivery modes. You can also find details of all course costs on our Fees page here.

At Central Regional TAFE, three types of fees may be charged:

  • Course fees - set by the State Government and are calculated on the category of enrolment.  Students studying a certificate course may be eligible for a concession. Concession students pay 30% of the course fees (not incidental, resource or other fees).
  • Resource fees - covers materials purchased by the TAFE which will be consumed or transformed by students in the course of instruction, such as workshop materials & workbooks.
  • Other fees - charged for goods and services that are provided by the TAFE such as security, name badges and IT infrastructure. 

In addition to these fees, students may need to purchase textbooks, uniforms and other course specific equipment.

Units

Block Units
Unit Title National ID Unit of Study
Identify basic automotive faults using troubleshooting processesAURATA001AXE63
Inspect and service steering systemsAURTTD002AXA79
Inspect and service suspension systemsAURTTD004AXA78
Remove, inspect and refit wheel hubs and associated brake componentsAURTTJ002AXA65
Test, charge and replace batteries and jump-start vehiclesAURETR025AXD79
Use and maintain measuring equipment in an automotive workplaceAURTTK001AXA63
RPL Units
Unit Title National ID Unit of Study
Balance wheels and tyresAURTTJ001AXA71
Carry out light vehicle wheel alignment operationsAURLTD006AXC50
Follow environmental and sustainability best practice in an automotive workplaceAURAEA002AXE88
Follow safe working practices in an automotive workplaceAURASA002AXE64
Remove, inspect and refit light vehicle wheel and tyre assembliesAURLTJ003AXC41
Remove, inspect, repair and refit light vehicle tyres and tubesAURLTJ002AXC39
Select light vehicle tyres and wheels for specific applicationsAURLTJ001AXC43
Use and maintain tools and equipment in an automotive workplaceAURTTK002AXA64
How to apply
Important information
Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

 
1 Start 2 Complete

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

    Array
(
    [tab_title_1] => Overview
    [tab_body_1] => 

Course Overview

Where Kalgoorlie
Duration

5 Days face to face with additional assessment time

HowFace To Face (Class Room)
Recognition Of Prior Learning
WhenAvailable Semester 1
[tab_format_1] => full_html [tab_title_2] => Careers [tab_body_2] =>

You may choose to progress to an Apprenticeship Pathway after completion of this qualification.

Further study opportunities:

[tab_format_2] => full_html [tab_title_3] => Fees [tab_body_3] =>

Please contact the college to receive an indicative price for this course.

The fees identified above for this course are (predominantly) based on full-time face-to-face delivery (or Apprenticeship/Traineeship delivery) for this course. Fees may vary depending on your choice of units and some delivery modes. You can also find details of all course costs on our Fees page here.

At Central Regional TAFE, three types of fees may be charged:

  • Course fees - set by the State Government and are calculated on the category of enrolment.  Students studying a certificate course may be eligible for a concession. Concession students pay 30% of the course fees (not incidental, resource or other fees).
  • Resource fees - covers materials purchased by the TAFE which will be consumed or transformed by students in the course of instruction, such as workshop materials & workbooks.
  • Other fees - charged for goods and services that are provided by the TAFE such as security, name badges and IT infrastructure. 

In addition to these fees, students may need to purchase textbooks, uniforms and other course specific equipment.

[tab_format_3] => full_html [tab_title_4] => Units [tab_body_4] =>

Block Units
Unit Title National ID Unit of Study
Identify basic automotive faults using troubleshooting processesAURATA001AXE63
Inspect and service steering systemsAURTTD002AXA79
Inspect and service suspension systemsAURTTD004AXA78
Remove, inspect and refit wheel hubs and associated brake componentsAURTTJ002AXA65
Test, charge and replace batteries and jump-start vehiclesAURETR025AXD79
Use and maintain measuring equipment in an automotive workplaceAURTTK001AXA63
RPL Units
Unit Title National ID Unit of Study
Balance wheels and tyresAURTTJ001AXA71
Carry out light vehicle wheel alignment operationsAURLTD006AXC50
Follow environmental and sustainability best practice in an automotive workplaceAURAEA002AXE88
Follow safe working practices in an automotive workplaceAURASA002AXE64
Remove, inspect and refit light vehicle wheel and tyre assembliesAURLTJ003AXC41
Remove, inspect, repair and refit light vehicle tyres and tubesAURLTJ002AXC39
Select light vehicle tyres and wheels for specific applicationsAURLTJ001AXC43
Use and maintain tools and equipment in an automotive workplaceAURTTK002AXA64
[tab_format_4] => full_html [tab_title_5] => [tab_body_5] => [tab_format_5] => [tab_title_6] => How to Apply [tab_body_6] =>

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Online and continuous or flexible learning enrolment courses normally have enrolments available ongoing at any time, for help enrolling or for more information:

Call: 1800 672 700 or email: info@crtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 672 700 or email: info@crtafe.wa.edu.au.

Please note: All enrolling students will require a Unique Student Identifier number.

Recognition of Prior Learning validates your existing skills and knowledge. Find out more under Future Students to customise your learning pathways.

Disclaimer

Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8C Grades in Year 10 English and Maths or equivalentCertificate I or Certificate II

[tab_format_6] => full_html [tab_title_7] => Uni Pathway [tab_body_7] =>

If you have completed a Diploma or Advanced Diploma qualification with Central Regional TAFE, you may be able to obtain credits towards a degree at Geraldton Universities Centre (GUC), Charles Sturt University, Central Queensland University and the University of Southern Queensland.

In addition to the arrangements in place with specific Universities, a Diploma or Advanced Diploma qualification from us will enable you to gain direct entry into related undergraduate degree courses in most Universities throughout Australia. You may also be eligible to gain credits with other Universities on a case-by-case basis.

 

[tab_format_7] => full_html )

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Online and continuous or flexible learning enrolment courses normally have enrolments available ongoing at any time, for help enrolling or for more information:

Call: 1800 672 700 or email: info@crtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 672 700 or email: info@crtafe.wa.edu.au.

Please note: All enrolling students will require a Unique Student Identifier number.

Recognition of Prior Learning validates your existing skills and knowledge. Find out more under Future Students to customise your learning pathways.

Disclaimer

Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8C Grades in Year 10 English and Maths or equivalentCertificate I or Certificate II

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Online and continuous or flexible learning enrolment courses normally have enrolments available ongoing at any time, for help enrolling or for more information:

Call: 1800 672 700 or email: info@crtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 672 700 or email: info@crtafe.wa.edu.au.

Please note: All enrolling students will require a Unique Student Identifier number.

Recognition of Prior Learning validates your existing skills and knowledge. Find out more under Future Students to customise your learning pathways.

Disclaimer

Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

Entrance Requirements

School Leaver Non-School Leaver AQF OLNA or NAPLAN 9 Band 8C Grades in Year 10 English and Maths or equivalentCertificate I or Certificate II

Qualification level

0
Available Semester 2
1
Available Semester 1

Clean up clone

Link to photo for PDF:

Photo override if needed:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Page last updated December 14, 2018