COVID-19 updates

Building

Builders coordinate the construction of building projects. Practice a diverse range of skills that will enable you to plan and supervise construction work and prepare, cost and schedule for a contract, learn about building codes and standards, legal requirements, estimating, site safety, timber code, project management, and structural principles, then apply these skills to low-rise residential and commercial constructions.

National ID State ID Title Qualification level Study mode Campus
52824WA BCY47 Building and Construction (Pathway - Trades) Certificate II Face to face (class room)
Pre-Apprenticeship
Kalgoorlie Campus

Are you looking for a Carpentry or Building and Construction career?

When you complete the Certificate II in Building and Construction you'll be what employers are looking for as an apprentice in the Carpentry and Building and Construction trades.  You will gain the knowledge and practical skills to work effectively in the construction industry, use hand and power tools, erect and dismantle restricted height scaffolding, levelling and concreting, interpret drawings, take measurements and workplace health and safety.

52824WA-AB31 AB31 Building and Construction (Pathway - Trades) (Carpentry and Joinery Pre-Apprenticeship) Certificate II Face to face (class room)
Pre-Apprenticeship
Kalgoorlie Campus
apprenticeship, pre apprenticeship, building, block laying, brick laying,

Are you looking for a Carpentry or Building and Construction career?

When you complete the Certificate II in Building and Construction you'll be what employers are looking for as an apprentice in the Carpentry and Building and Construction trades.  You will gain the knowledge and practical skills to work effectively in the construction industry, use hand and power tools, erect and dismantle restricted height scaffolding, levelling and concreting, interpret drawings, take measurements and workplace health and safety.

This is a pre-vocational course for pre-apprentice learners seeking to gain an apprenticeship in the Construction industry. Learners can complete common core competencies shared between 11 Construction trades, then select additional competencies from ONE trade pathway.

Learners will develop relevant technical, vocational and interpersonal competencies suitable for further training in construction as well as skills, knowledge and experiences that may be transferable to other industry areas.

KAB04 Dogging Skill Set Skill set Face to face (class room)
Skill set
Northam Campus

Safely perform slinging techniques 

This skill set covers the necessary skills and knowledge required to safely perform slinging techniques including the selection of lifting gear and/or directing the of the crane operator when the load is out of view of the operator. You will gain the skills to accurately use judgement in relation to choosing suitable lifting gear and the method of slinging by considering the nature of the load, its mass and centre of gravity. 

Topics covered include:

  • Plan and prepare
  • Identify risks and hazards
  • Calculate rated load capacity 
  • Identify, select, inspect and assemble lifting equipment
  • Move loads and direct crane and/or hoist operator 

 

Course Content

The below unit of competency is included in this course:

CPCCLDG3001A          Licence to perform dogging

 

Certification

Upon successful completion you will receive a Statement of Attainment. 

 

Enrolment & Enquiries 

For more information about this course and to enrol:

Contact: Tracy Hicks | Commercial Training Coordinator - Kalgoorlie Campus

9088 6830 | 1800 672 700

Email: info@crtafe.wa.edu.au

Enquiry Form: Complete the course enquiry form below. 

 

To find out more about studying with us please also refer to our Course Guide and Student Information Pack.

KAA27 Excavator Skill Set Skill set Face to face (class room)
Skill set
Northam Campus
KAA27, excavator, building, construction, safety, industry, training, mining,

Safely operate an excavator 

Students will gain the skills and knowledge to safely operate an excavator to lift and carry materials under supervision. 

Topics covered include:

  • Assess risks and identify hazards
  • Operate an excavator in-line with regulations
  • Select, fit and remove attachments
  • Lift, carry and place materials 

 

Course Content

The below nationally recognised unit of competency is included in this course: 

RIIMPO320F          Conduct civil construction excavator operations 

 

Certification

Upon successful completion you will receive a Statement of Attainment 

 

Enrolment & Enquiries 

For more information about this course and to enrol:

Contact: Tracy Hicks | Commercial Training Coordinator - Kalgoorlie Campus

9088 6830 | 1800 672 700

Email: info@crtafe.wa.edu.au

Enquiry Form: Complete the course enquiry form below. 

 

To find out more about studying with us please also refer to our Course Guide and Student Information Pack. 

KAA09 Licence to Operate a Forklift Truck Skill Set Skill set Face to face (class room)
Kalgoorlie Campus
forklift, worksafe. high risk, safety, industry, building, construction, mining

Gain the skills and knowledge to safely operate a forklift truck.

As per national guidelines students will learn how to conduct routine checks, proper shifting of a load and how to correctly shutdown and secure a forklift. Forklift is considered high risk work and you will attain the skills required to maneuver goods in a variety of industries including manufacturing, transport, mining and production industries.

 

Course Content

The below nationally recognised unit of competency is included in this course:

TLILIC0003          Licence to operate a forklift truck

 

Certification

Upon successful completion you will receive a Statement of Attainment. 

A WorkSafe fee for the High Risk Licence is included into the course fee and completed applications and fees will be sent directly to WorkSafe. An interim licence will be issued to allow forklift operation until application is processed. 

 

Enrolment & Enquiries

For more information about this course and to enrol:

Contact: Tracy Hicks | Commercial Training Coordinator - Kalgoorlie Campus

9088 6830 | 1800 672 700

Email: info@crtafe.wa.edu.au

Enquiry Form: Complete the course enquiry form below 

 

To find out more about studying with us please also refer to our Course Guide and Student Information Pack.

KAA19 White Card Skill Set Skill set Face to face (class room)
Skill set
Northam Campus
construction, OH&S, Worksafe, induction, safety, work place, builder, white card, KAA19, carpentry, building, plumbing, industry, electrical, bricklaying, plastering

Enter and work on a construction site 

You will gain the basic knowledge to safely enter and work on a construction site and includes hazard identification and prevention of workplace accidents and injures. Under Work Health and Safety Legislation you must have a White Card  to enter a construction site. 

Topics covered include:

  • Health and safety requirements
  • Construction hazards and control measures
  • Health and safety communication and reporting process
  • Incident and emergency response procedures 
     

Course Content

The below nationally recognised unit of competency is included in this course:

CPCCWHS1001          Prepare to work safely in the construction industry 

 

Certification 

Upon successful completion you will receive a Statement of Attainment.

Students will also receive their White Card. 

 

Enrolment & Enquiries

For more information about this course and to enrol: 

Contact: Tracy Hicks | Commercial Training Coordinator - Kalgoorlie Campus

9088 6830 | 1800 672 700

Email: info@crtafe.wa.edu.au

Enquiry Form: Complete the course enquiry form below. 

 

To find out more about studying with us please also refer to our Course Guide and Student Information Pack

 

Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

Page last updated July 25, 2016