COVID-19 updates
Home | Sub Study Area | General Construction

General Construction

Traffic Management Refresher

State ID: G0036P

Refresh your traffic management knowledge in this Main Roads WA accredited short course 

This Refresher Basic Worksite Traffic Management and Traffic Controller course provides students with updated industry information to perform their duties in line with the Main Roads WA Traffic Management for Works on Roads Codes of Practice.

 

Certification

Upon successful completion students will be issued with a Certificate of Participation. 

Students will also receive  Main Roads WA accreditation. 

Important information

How to apply

Important information

Duration

1 day 

Fees

$350

Course Requirements

Students will need: 

  • Main Roads WA Basic Worksite Traffic Management and Traffic Controller accreditation
  • Declaration confirming traffic management experience
  • Valid Drivers License 
  • White Card 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Semester 1, 2020

Kalgoorlie Campus - Traffic Management Refresher

Details

Units

Overview
Duration 1 day/s
When Semester 1, 2020
Where Kalgoorlie Campus
How Face to face (class room)
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Dogging Skill Set

State ID: KAB04

Safely perform slinging techniques 

This skill set covers the necessary skills and knowledge required to safely perform slinging techniques including the selection of lifting gear and/or directing the of the crane operator when the load is out of view of the operator. You will gain the skills to accurately use judgement in relation to choosing suitable lifting gear and the method of slinging by considering the nature of the load, its mass and centre of gravity. 

Topics covered include:

How to apply

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Semester 1, 2020

Northam Campus - Dogging Skill Set

Overview

Fees and charges

Overview
Duration 5 day/s
When Semester 1, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Northam Campus - Dogging Skill Set

Overview

Fees and charges

Overview
Duration 5 day/s
When Semester 2, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Non-Slewing Mobile Crane Licence Skills Set

State ID: KAB54

Safely operate a non-slewing mobile crane

Learn how to safely operate a non-slewing mobile crane with a capacity exceeding 3 tonnes. Non-slewing crane refers to cranes that incorporate a boom or jib that cannot be slewed and includes a locomotive and articulated mobile crane. Topics covered include:

  • Conduct routine checks
  • Set-up
  • Transfer load
  • Shut down and secure crane

 

Course Content

The below nationally recognised unit of competency is included in this course:

How to apply

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Semester 1, 2020

Northam Campus - Non-Slewing Mobile Crane Licence Skills Set - Term 1

Overview

Fees and charges

Overview
Duration 5 day/s
When Semester 1, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Northam Campus - Non-Slewing Mobile Crane Licence Skills Set - Term 2

Overview

Fees and charges

Overview
Duration 5 day/s
When Semester 1, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Licence to Operate a Forklift Truck Skill Set

State ID: KAA20

Gain the skills and knowledge to safely operate a forklift truck.

As per national guidelines students will learn how to conduct routine checks, proper shifting of a load and how to correctly shutdown and secure a forklift. Forklift is considered high risk work and you will attain the skills required to maneuver goods in a variety of industries including manufacturing, transport, mining and production industries.

 

Course Content

The below nationally recognised unit of competency is included in this course:

Important information

How to apply

Important information

Duration

2 Days 

Course Requirements

Students will need:

  • Steel capped boots
  • Long pants and long sleeved shirt
  • Two coloured passport photos and two forms of identification

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Semester 1, 2020

Northam Campus - Licence to Operate a Forklift Truck Skill Set - February

Overview

Fees and charges

Overview
Duration 2 day/s
When Semester 1, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Conduct Hydraulic Excavator Operations Skills Set

State ID: KAB38

Gain the skills and knowledge to conduct hydraulic excavator operations. 

This course is suited for those already working or seeking work in an operational role in the mining or construction industry and are required to conduct hydraulic excavator operations. 

Topics covered include:

  • Plan and prepare
  • Operate an hydraulic excavator
  • Maintenance
  • Safety 

 

Course Content

The below nationally recognised unit of competency is included in this course:

Important information

How to apply

Important information

Duration

1 Day 

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

White Card Skills Set (2 Days)

State ID: KAB40

Gain the basic knowledge to safely enter and work on a construction site. 

This short course will allow students to receive a White Card which under Work, Health and Safety Legislation is required to enter a construction site. Students will also learn to identify hazards and prevention of workplace accidents and injuries.

Topics covered in this course include:

Important information

How to apply

Important information

Duration

2 Days

 

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Semester 1, 2020

Northam Campus - White Card Skills Set (2 Days)

Overview

Fees and charges

Overview
Duration 2 day/s
When Semester 1, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Northam Campus - White Card Skills Set (2 Days)

Overview

Fees and charges

Overview
Duration 2 day/s
When Semester 2, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Introduction to Trade Maths

State ID: G021P

Gain an understanding of basic applied mathematics

The objective of this Trade Maths course is to provide a practical understanding of basic mathematical practices.

This course is designed for students wanting to pursue a career in engineering studies as well as anybody wanting to improve their current mathematical skills. 

Topics covered include:

Entrance Requirements

Prerequisites

Important information

How to apply

Entrance Requirements

Minimum level Year 10 English or equivalent

Prerequisites

There are no prerequisites for this course

Important information

Duration 

6 Sessions

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Skid Steer Loader Skill Set

State ID: KAA23

Operate and shift materials with a skid-steer loader. 

Learn how to safely load and operate a skid-steer loader. Topics covered include:

  • Operate skid steer in line with requirements 
  • Load, carry and place materials
  • Remove and fit attachments
  • Safety 

 

Course Content

RIIMPO334E       Conduct skid steer loader operations using attachments 

 

Certification

Upon successful completion you will receive a Statement of Attainment

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Conduct Telescopic Materials Handler Operations Skills Set

State ID: KAB09

Safely operate a telescopic material handler

Gain the skills and knowledge to safely and efficiently conduct telescopic material handler operations. 

Topics covered include:

  • Planning and preparation
  • Pre-operational checks
  • Operate and secure telescopic material handler
  • Routine maintenance
  • Work health and safety 

 

Course Content

The below nationally recognised unit of competency is included in this course:

RIIHAN309F          Conduct telescopic materials handler operations

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Excavator Skill Set

State ID: KAA27

Safely operate an excavator 

Students will gain the skills and knowledge to safely operate an excavator to lift and carry materials under supervision. 

Topics covered include:

  • Assess risks and identify hazards
  • Operate an excavator in-line with regulations
  • Select, fit and remove attachments
  • Lift, carry and place materials 

 

Course Content

The below nationally recognised unit of competency is included in this course: 

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by:

Calling your local campus on 1800 672 700 or completing the short course enquiry form at the bottom of your selected course page.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Semester 1, 2020

Northam Campus - Excavator Skill Set - Term 1

Overview

Fees and charges

Overview
Duration 2 day/s
When Semester 1, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Northam Campus - Excavator Skill Set - Term 2

Overview

Fees and charges

Overview
Duration 2 day/s
When Semester 1, 2020
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Pages