COVID-19 updates
Home | Sub Study Area | General Construction

General Construction

Introduction to Trade Maths

State ID: G021P

Gain an understanding of basic applied mathematics

The objective of this Trade Maths course is to provide a practical understanding of basic mathematical practices.

This course is designed for students wanting to pursue a career in engineering studies as well as anybody wanting to improve their current mathematical skills. 

Topics covered include:

Entrance Requirements

Prerequisites

Important information

How to apply

Entrance Requirements

Minimum level Year 10 English or equivalent

Prerequisites

There are no prerequisites for this course

Important information

Duration 

6 Sessions

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

We are currently taking expressions of interest for this course. Contact our student services team on 1800 672 700 for more information or complete the course enquiry form below. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Skid Steer Loader Skill Set

State ID: KAA23

Operate and shift materials with a skid-steer loader. 

Learn how to safely load and operate a skid-steer loader. Topics covered include:

  • Operate skid steer in line with requirements 
  • Load, carry and place materials
  • Remove and fit attachments
  • Safety 

 

Course Content

RIIMPO334E  Conduct skid steer loader operations using attachments 

OR

RIIMPO318F  Conduct civil construction skid steer loader operations

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Available all year round, 2020

Northam Campus - Skid Steer Loader Operations Skills Set

Overview

Units

Overview
Duration 2 day/s
When Available all year round
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Civil Front End Loader Skill Set

State ID: KAB05

Gain the skills and knowledge to safely conduct supervised wheeled front end loader operations. 

This course is suitable for those working on-site within the construction industry. 

Topics covered include:

  • Pre-start, set-up. operational and shut down procedures
  • Hazard identification and risk management
  • Work health and safety requirements
  • Identifying, selecting, using and removing attachments 
  • Safely shift loads 

 

How to apply

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

We are currently taking expressions of interest for this course. Contact our student services team on 1800 672 700 for more information or complete the course enquiry form below. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Conduct Telescopic Materials Handler Operations Skills Set

State ID: KAB09

Safely operate a telescopic material handler

Gain the skills and knowledge to safely and efficiently conduct telescopic material handler operations. 

Topics covered include:

  • Planning and preparation
  • Pre-operational checks
  • Operate and secure telescopic material handler
  • Routine maintenance
  • Work health and safety 

 

Course Content

For a list of the nationally accredited units included in this course please refer to your preferred campus delivery information below. 

 

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

We are currently taking expressions of interest for this course. Contact our student services team on 1800 672 700 for more information or complete the course enquiry form below. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Excavator Skill Set

State ID: KAA27

Safely operate an excavator 

Students will gain the skills and knowledge to safely operate an excavator to lift and carry materials under supervision. 

Topics covered include:

  • Assess risks and identify hazards
  • Operate an excavator in-line with regulations
  • Select, fit and remove attachments
  • Lift, carry and place materials 

 

Course Content

For a list of the nationally accredited units included in this course please refer to your preferred campus delivery information below. 

 

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

We are currently taking expressions of interest for this course. Contact our student services team on 1800 672 700 for more information or complete the course enquiry form below. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Conduct Tractor Operations Skills Set

State ID: KAB37

Safely operate a tractor. 

Gain the skills and knowledge to safely use a tractor on a work site.

Topics covered include:

  • Safe operating techniques
  • Fit, use and remove attachments
  • Routine maintenance
  • Safety 

 

Course Content

For a list of the nationally accredited units included in this course please refer to your preferred campus delivery information below. 

 

Certification

Upon successful completion you will receive a Statement of Attainment

Important information

How to apply

Important information

 

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

We are currently taking expressions of interest for this course. Contact our student services team on 1800 672 700 for more information or complete the course enquiry form below. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Licence to Operate a Forklift Truck Skill Set

State ID: KAA09

Gain the skills and knowledge to safely operate a forklift truck.

As per national guidelines students will learn how to conduct routine checks, proper shifting of a load and how to correctly shutdown and secure a forklift. Forklift is considered high risk work and you will attain the skills required to maneuver goods in a variety of industries including manufacturing, transport, mining and production industries.

Important information

Study pathway

How to apply

Important information

Duration

2 Days 

Course Requirements

Students will need:

  • Steel capped boots
  • Long pants and long sleeved shirt
  • Two coloured passport photos and two forms of identification

 

Study pathway

Further study opportunities

Central Regional TAFE has many further study opportunities available. Check out our Course Guide for all your future study options. 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

We are currently taking expressions of interest for this course. Contact our student services team on 1800 672 700 for more information or complete the course enquiry form below. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Traffic Management Skill Set

State ID: KAA12

The Traffic Management Skill Set is for people who want to work in traffic management on public roads and other designated traffic management areas

This course will provide you with the knowledge and skills required to be able to safely control traffic with a stop/slow bat and implement basic traffic management plans for works on roads in accordance with Main Roads WA requirements. 

Topics covered include:

Important information

How to apply

Important information

Duration

3 Days

Course Requirements

  • Evidence of a valid driver's license, or evidence of previously having held a driver's license (no learner's permits or moped licenses).
  • Literacy and numeracy skills to a level that will allow you to complete the written component of the assessment.
  • A White Card (Safety Awareness Training) is now a required pre-requisite in order for attendees to complete the logbook component of the training and to be issued with this accreditation to work on a road site 

For the practical assessment you will need:

  • Wear appropriate work wear steel capped boots
  • Hi-visibility clothing if possible.
  • Hat and sunscreen recommended.
  • Safety glasses/sunglasses.
How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Semester 2, 2020

Geraldton Campus - Traffic Management Skill Set - 13 to 15 October

Overview

Units

Overview
Duration 3 day/s
When Semester 2, 2020
Where Geraldton Campus
How Face to face (class room)
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Geraldton Campus - Traffic Management Skill Set - 15 to 17 September

Overview

Units

Overview
Duration 3 day/s
When Semester 2, 2020
Where Geraldton Campus
How Face to face (class room)
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Geraldton Campus - Traffic Management Skill Set - 17 to 19 November

Overview

Units

Overview
Duration 3 day/s
When Semester 2, 2020
Where Geraldton Campus
How Face to face (class room)
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Kalgoorlie Campus - Traffic Management Skill Set - 22 to 24 September

Overview

Units

Overview
Duration 3 day/s
When Semester 2, 2020
Where Kalgoorlie Campus
How Face to face (class room)
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Northam Campus - Traffic Management Skill Set

Overview

Units

Overview
Duration 5 day/s
When Semester 2, 2020
Where Northam Campus
How Face to face (class room)
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate I in Industrial Skills (Entry Level Training)

National ID: 52807WA | State ID: BCX38

Combined Construction and Industrial Skills! Two Courses at once!

This program offers the best of Certificate II in Construction along with Certificate I in Industrial Skills.

The selection of units in this combined program will give the client an extensive range of recognised skills, such as carpentry, working at heights and in confined spaces, scaffolding, leveling, use of tools and equipment, skid steer, forklift, excavator and White Card.

Course requirements

Important information

Job opportunities

Study pathway

How to apply

Course requirements

Licensing Outcomes

Clients must be over 18 to receive a forklift license but can still participate in the unit.

Important information

Additional Resources

You will need to wear steel cap safety boots and safety glasses. Hard Yakka type clothing is preferred.

Disclaimer

Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

Job opportunities

Your qualification prepares you for roles such as entry into the resource industry workforce and articulation into specialised trade studies.

Study pathway

Further study opportunities

Central Regional TAFE has many further study opportunities available. Check out our Course Guide for all your future study options. 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

We are currently taking expressions of interest for this course. Contact our student services team on 1800 672 700 for more information or complete the course enquiry form below. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

GenCon_003

Pages