COVID-19 updates
Home | Sub Study Area | Mining

Mining

Non-Slewing Mobile Crane Licence Skills Set

State ID: KAB54

Safely operate a non-slewing mobile crane

Learn how to safely operate a non-slewing mobile crane with a capacity exceeding 3 tonnes. Non-slewing crane refers to cranes that incorporate a boom or jib that cannot be slewed and includes a locomotive and articulated mobile crane. Topics covered include:

  • Conduct routine checks
  • Set-up
  • Transfer load
  • Shut down and secure crane

 

Course Content

The below nationally recognised unit of competency is included in this course:

How to apply

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Surface Extraction Operations

National ID: RII30115 | State ID: AZE5

This qualification reflects the role of employees such as production operators in an open cut mine or quarry, who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures.

Entrance Requirements

Important information

How to apply

Entrance Requirements

 

Participants must meet mine site requirements.

Important information

Disclaimer

Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Available all year round, 2020

Kalgoorlie Campus - Advanced Standing Only

Overview

Fees and charges

Units

Overview
Duration 3 month/s
When Available all year round
Where Kalgoorlie Campus
How Recognition of Prior Learning
Register now
Ready to register for this course?  Check out the apply and enrol page, register now in our Application Portal or contact us on 1800 672 700.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Conduct Hydraulic Excavator Operations Skills Set

State ID: KAB38

Gain the skills and knowledge to conduct hydraulic excavator operations. 

This course is suited for those already working or seeking work in an operational role in the mining or construction industry and are required to conduct hydraulic excavator operations. 

Topics covered include:

  • Plan and prepare
  • Operate an hydraulic excavator
  • Maintenance
  • Safety 

 

Course Content

The below nationally recognised unit of competency is included in this course:

Important information

How to apply

Important information

Duration

1 Day 

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Project Management Start to Finish

State ID: G0031P

Designed for people working in projects across any industry including mining, building, engineering, information technology, events, business processes and more!

You will gain a  practical understanding of projects and the application of core tools. You will use templates which can then immediately be used for your own projects. 

Topics covered include:

Important information

How to apply

Important information

Duration 

3 Days

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Skid Steer Loader Skill Set

State ID: KAA23

Operate and shift materials with a skid-steer loader. 

Learn how to safely load and operate a skid-steer loader. Topics covered include:

  • Operate skid steer in line with requirements 
  • Load, carry and place materials
  • Remove and fit attachments
  • Safety 

 

Course Content

RIIMPO334E       Conduct skid steer loader operations using attachments 

 

Certification

Upon successful completion you will receive a Statement of Attainment

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Available all year round, 2020

Northam Campus - Skid Steer Loader Operations Skills Set

Overview

Fees and charges

Overview
Duration 2 day/s
When Available all year round
Where Northam Campus
How Face to face (class room)
Skill set
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Conduct Telescopic Materials Handler Operations Skills Set

State ID: KAB09

Safely operate a telescopic material handler

Gain the skills and knowledge to safely and efficiently conduct telescopic material handler operations. 

Topics covered include:

  • Planning and preparation
  • Pre-operational checks
  • Operate and secure telescopic material handler
  • Routine maintenance
  • Work health and safety 

 

Course Content

The below nationally recognised unit of competency is included in this course:

RIIHAN309F          Conduct telescopic materials handler operations

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Excavator Skill Set

State ID: KAA27

Safely operate an excavator 

Students will gain the skills and knowledge to safely operate an excavator to lift and carry materials under supervision. 

Topics covered include:

  • Assess risks and identify hazards
  • Operate an excavator in-line with regulations
  • Select, fit and remove attachments
  • Lift, carry and place materials 

 

Course Content

The below nationally recognised unit of competency is included in this course: 

Important information

How to apply

Important information

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Conduct Tractor Operations Skills Set

State ID: KAB37

Safely operate a tractor. 

Gain the skills and knowledge to safely use a tractor on a work site.

Topics covered include:

  • Safe operating techniques
  • Fit, use and remove attachments
  • Routine maintenance
  • Safety 

 

Course Content

The below nationally recognised unit of competency is included in this course: 

RIIMPO3015E          Conduct tractor operations 

 

Certification

Upon successful completion you will receive a Statement of Attainment

Important information

How to apply

Important information

 

 

 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Resource Processing

National ID: RII30415 | State ID: AZF3

This qualification reflects the role of employees such as production operators in a metalliferous processing facility or a coal preparation and treatment plant, who perform tasks involving a broad range of skilled applications in varied work context using some discretion and judgement in selecting equipment, services or contingency measures.

Entrance Requirements

Study pathway

How to apply

Entrance Requirements

 

Participants are required to be 18 years or over and meet the physical fitness required for mine site entry and already be working with Kanowna Belle.

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Available all year round, 2020

Kalgoorlie Campus - Workplace Assessment

Overview

Fees and charges

Units

Overview
Duration 6 month/s
When Available all year round
Where Kalgoorlie Campus
How Continuous Enrolment
External mode
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Kalgoorlie Campus - Workplace Assessment

Overview

Fees and charges

Units

Overview
Duration 1 year/s
When Available all year round
Where Kalgoorlie Campus
How Continuous Enrolment
External mode
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Advanced Diploma of Metalliferous Mining

National ID: RII60115 | State ID: AZF7

Advance to the next level in your mining career!

This qualification reflects the role of open cut or underground metalliferous mine managers who perform tasks that are broad, specialised, complex and technical and include strategic areas and initiating activities. They are required to demonstrate self-directed application of theoretical and technical knowledge and initiate solutions to technical problems or management requirements.

Important information

Job opportunities

Study pathway

How to apply

Important information

Disclaimer

Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

 

Job opportunities

Your qualification prepares you for roles such as: Production Manager (Mining), Mine Manager, Mine Superintendent, Quarry Manager, Coal Mine Manager, Quarry Operations Area Manager, Mine Manager (Metalliferous Mining), Quarry Operations Manager or Quarry Operations Technical Manager.

Study pathway

Further study opportunities

Central Regional TAFE has many further study opportunities available. Check out our Course Guide for all your future study options. 

How to apply
On Campus (Full-Time or Part-Time)
 Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.  
Flexible and Other Study Types 
We take applications for many of our flexible courses all year round.  Visit the Apply and Enrol page and use our Applicant Portal to lodge your application anytime. 
Apprenticeships and Traineeships 
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. Find out more here.
International Students 
International students please visit www.tafeinternational.wa.edu.au Opens in a new window 
Short Courses and Skill Sets

Enrol in a short course or skill set by completing the form below, calling our student services team on 1800 672 700 or visiting your local campus.

 

Delivery location, important dates and study options

Training at CRTAFE will be offered with a blended, flexible delivery model to enable social distancing measures during the COVID-19 pandemic. This approach may include a combination of online and classroom based delivery, as well as practical and work experience placements. While the mode of delivery may vary, the content and key learning outcomes of the course will remain the same. Lecturers will provide specific instructions to their student groups on how training will be undertaken and the support available to them.

Available all year round, 2020

Kalgoorlie Campus - Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year/s
When Available all year round
Where Kalgoorlie Campus
How Continuous Enrolment
External mode
Flexible delivery
Register now
Ready to register for this course?  Check out the apply and enrol page, register now in our Application Portal or contact us on 1800 672 700.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Pages