Certificate IV in Work Health and Safety courses & training in Perth Australia

National ID: BSB41415 | State ID: AVW3

Course Details
Training Package Version :
Upgrade your prior OHS knowledge with a Certificate IV in Work Health and Safety and improve and advance your career opportunities. Every industry requires team members who know how to comply with current legislation across key areas including consultation and training in the workplace; management of hazards and risks; WHS management systems; incident and emergency management and the management of contractors. By developing technical knowledge and skill in WHS you will be ready for the legal and compliance demands of modern small and large business or corporate environments.
Additional Resources Learners will be required to provide additional resources for this course. Details are provided in the Pre-Enrolment Pack.

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements

School Leaver	Non-School Leaver	AQF
C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8	C Grades in Year 11 English and Maths or equivalent	Certificate II or Certificate III

Study pathway

Job opportunities

Your qualification prepares you for roles such as:

Safety Inspector,
Safety Representative,
OSH Representative.

Further study opportunities:

Diploma of Work, Health and Safety. A range of other BSB07 diploma qualifications.

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview

Course Overview

Where	Geraldton Kalgoorlie
Duration	This course is offered flexibly and enrolment is open throughout the year. The length of time to complete the course will depend on your chosen units and your study pace.
How	Continuous Enrolment Flexible Delivery Online Delivery Recognition Of Prior Learning Workplace Assessment
When	Available Semester 2 Available Semester 1

Fees and charges

Please contact the college to receive an indicative price for this course.

The fees identified above for this course are (predominantly) based on full-time face-to-face delivery (or Apprenticeship/Traineeship delivery) for this course. Fees may vary depending on your choice of units and some delivery modes. You can also find details of all course costs on our Fees page here.

At Central Regional TAFE, three types of fees may be charged:

Course fees - set by the State Government and are calculated on the category of enrolment. Students studying a certificate course may be eligible for a concession. Concession students pay 30% of the course fees (not incidental, resource or other fees).
Resource fees - covers materials purchased by the TAFE which will be consumed or transformed by students in the course of instruction, such as workshop materials & workbooks.
Other fees - charged for goods and services that are provided by the TAFE such as security, name badges and IT infrastructure.

In addition to these fees, students may need to purchase textbooks, uniforms and other course specific equipment.

Units

This course requires you to complete 10 units of competence. You are able to make some choices from the electives outlined below.

1 Core Units

Unit Title	National ID	Unit of Study
Assist with compliance with WHS laws	BSBWHS402	AUI25
Assist with responding to incidents	BSBWHS406	AUK46
Contribute to implementing and maintaining WHS consultation and participation processes	BSBWHS403	AUI30
Contribute to implementing and maintaining WHS management systems	BSBWHS405	AUH35
Contribute to WHS hazard identification, risk assessment and risk control	BSBWHS404	AUL09

2 Group A Elective Units

Unit Title	National ID	Unit of Study
Assist with claims management, rehabilitation and return-to-work programs	BSBWHS407	AUM41
Assist with effective WHS management of contractors	BSBWHS408	AUI03
Assist with workplace monitoring processes	BSBWHS409	AUI93
Contribute to work-related health and safety measures and initiatives	BSBWHS410	AUK21
Ensure workplace emergency prevention procedures, systems and processes are implemented	PUAWER002B	D5573

3 Group B Elective Units

Unit Title	National ID	Unit of Study
Make a presentation	BSBCMM401	AUI59
Write complex documents	BSBWRT401	AUK28

How to apply

Important information

Enquire now

Call us
Email us

Print course study plan

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

1 Start 2 Complete

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

First name *

Last name *

Preferred contact method *

Phone

Course name *

Delivery location

Preferred delivery mode

How did you hear about us?

Have you studied with us before?

Array ( [tab_title_1] => Overview [tab_body_1] =>

Course Overview

Where	Geraldton Kalgoorlie
Duration	This course is offered flexibly and enrolment is open throughout the year. The length of time to complete the course will depend on your chosen units and your study pace.
How	Continuous Enrolment Flexible Delivery Online Delivery Recognition Of Prior Learning Workplace Assessment
When	Available Semester 2 Available Semester 1

[tab_format_1] => full_html [tab_title_2] => Careers [tab_body_2] =>

Safety Inspector,
Safety Representative,
OSH Representative.

Further study opportunities:

Diploma of Work, Health and Safety. A range of other BSB07 diploma qualifications.

[tab_format_2] => full_html [tab_title_3] => Fees [tab_body_3] =>

Please contact the college to receive an indicative price for this course.

At Central Regional TAFE, three types of fees may be charged:

Course fees - set by the State Government and are calculated on the category of enrolment. Students studying a certificate course may be eligible for a concession. Concession students pay 30% of the course fees (not incidental, resource or other fees).
Resource fees - covers materials purchased by the TAFE which will be consumed or transformed by students in the course of instruction, such as workshop materials & workbooks.
Other fees - charged for goods and services that are provided by the TAFE such as security, name badges and IT infrastructure.

In addition to these fees, students may need to purchase textbooks, uniforms and other course specific equipment.

[tab_format_3] => full_html [tab_title_4] => Units [tab_body_4] =>

This course requires you to complete 10 units of competence. You are able to make some choices from the electives outlined below.

1 Core Units

Unit Title	National ID	Unit of Study
Assist with compliance with WHS laws	BSBWHS402	AUI25
Assist with responding to incidents	BSBWHS406	AUK46
Contribute to implementing and maintaining WHS consultation and participation processes	BSBWHS403	AUI30
Contribute to implementing and maintaining WHS management systems	BSBWHS405	AUH35
Contribute to WHS hazard identification, risk assessment and risk control	BSBWHS404	AUL09

2 Group A Elective Units

Unit Title	National ID	Unit of Study
Assist with claims management, rehabilitation and return-to-work programs	BSBWHS407	AUM41
Assist with effective WHS management of contractors	BSBWHS408	AUI03
Assist with workplace monitoring processes	BSBWHS409	AUI93
Contribute to work-related health and safety measures and initiatives	BSBWHS410	AUK21
Ensure workplace emergency prevention procedures, systems and processes are implemented	PUAWER002B	D5573

3 Group B Elective Units

Unit Title	National ID	Unit of Study
Make a presentation	BSBCMM401	AUI59
Write complex documents	BSBWRT401	AUK28

[tab_format_4] => full_html [tab_title_5] => [tab_body_5] => [tab_format_5] => [tab_title_6] => How to Apply [tab_body_6] =>

If this course uses TAFE Admissions, to study full-time in 2019 apply through tasonline.tafe.wa.edu.au.

Online and continuous or flexible learning enrolment courses normally have enrolments available ongoing at any time, for help enrolling or for more information:

Call: 1800 672 700 or email: info@crtafe.wa.edu.au

You can also register and apply for a course through our Application Portal. More detail here.

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 672 700 or email: info@crtafe.wa.edu.au.

Please note: All enrolling students will require a Unique Student Identifier number.

Recognition of Prior Learning validates your existing skills and knowledge. Find out more under Future Students to customise your learning pathways.

Disclaimer

Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

Entrance Requirements

School Leaver	Non-School Leaver	AQF
C Grades in Year 11 WACE General English, and OLNA or NAPLAN 9 Band 8	C Grades in Year 11 English and Maths or equivalent	Certificate II or Certificate III

[tab_format_6] => full_html [tab_title_7] => Uni Pathway [tab_body_7] =>

If you have completed a Diploma or Advanced Diploma qualification with Central Regional TAFE, you may be able to obtain credits towards a degree at Geraldton Universities Centre (GUC), Charles Sturt University, Central Queensland University and the University of Southern Queensland.

In addition to the arrangements in place with specific Universities, a Diploma or Advanced Diploma qualification from us will enable you to gain direct entry into related undergraduate degree courses in most Universities throughout Australia. You may also be eligible to gain credits with other Universities on a case-by-case basis.

[tab_format_7] => full_html )

If this course uses TAFE Admissions, to study full-time in 2019 apply through tasonline.tafe.wa.edu.au.

Online and continuous or flexible learning enrolment courses normally have enrolments available ongoing at any time, for help enrolling or for more information:

Call: 1800 672 700 or email: info@crtafe.wa.edu.au

You can also register and apply for a course through our Application Portal. More detail here.

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 672 700 or email: info@crtafe.wa.edu.au.

Please note: All enrolling students will require a Unique Student Identifier number.

Recognition of Prior Learning validates your existing skills and knowledge. Find out more under Future Students to customise your learning pathways.

Disclaimer

Entrance Requirements

School Leaver	Non-School Leaver	AQF
C Grades in Year 11 WACE General English, and OLNA or NAPLAN 9 Band 8	C Grades in Year 11 English and Maths or equivalent	Certificate II or Certificate III

If this course uses TAFE Admissions, to study full-time in 2019 apply through tasonline.tafe.wa.edu.au.

Online and continuous or flexible learning enrolment courses normally have enrolments available ongoing at any time, for help enrolling or for more information:

Call: 1800 672 700 or email: info@crtafe.wa.edu.au

You can also register and apply for a course through our Application Portal. More detail here.

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 672 700 or email: info@crtafe.wa.edu.au.

Please note: All enrolling students will require a Unique Student Identifier number.

Recognition of Prior Learning validates your existing skills and knowledge. Find out more under Future Students to customise your learning pathways.

Disclaimer

Entrance Requirements

School Leaver Non-School Leaver AQF C Grades in Year 11 WACE General English, and OLNA or NAPLAN 9 Band 8C Grades in Year 11 English and Maths or equivalentCertificate II or Certificate III

Qualification level

Certificate IV

Business and Finance

Work Health and Safety

Available Semester 2

Available Semester 1

Fee Type	Course Fee	Resource Fee	Total Fee
General	$2,318.00	$174.37	$2,492.37

Clean up clone

Link to photo for PDF:

Photo override if needed:

Course title:

National and state ID:

About this course: <div class="field field-name-body field-type-text-with-summary field-label-hidden"><div class="field-items"><div class="field-item even"> <table width="100%" cellspacing="1" cellpadding="1" border="1"><caption>Course Details</caption> <tbody><tr><td> Training Package Version : </td> </tr><tr><td>     color:#333333;mso-ansi-language:EN" lang="EN" xml:lang="EN">Upgrade your prior OHS knowledge with a Certificate IV in Work Health and Safety and improve and advance your career opportunities. Every industry requires team members who know how to comply with current legislation across key areas including consultation and training in the workplace; management of hazards and risks; WHS management systems; incident and emergency management and the management of contractors. By developing technical knowledge and skill in WHS you will be ready for the legal and compliance demands of modern small and large business or corporate environments. </td> </tr><tr><td>  normal">Additional Resources Learners will be required to provide additional resources for this course. Details are provided in the Pre-Enrolment Pack. </td> </tr></tbody></table></div></div></div>

Overview:

Entrance requirements: <table class="entrance_requirement"> <tbody> <tr> <th class="col1">School Leaver</th> <th class="col2">Non-School Leaver</th> <th class="col3">AQF</th> </tr> </tbody> <tbody> <tr> <td>C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8</td> <td>C Grades in Year 11 English and Maths or equivalent</td> <td>Certificate II or Certificate III</td> </tr> </tbody> </table>

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply Visit our <a href="https://www.centralregionaltafe.wa.edu.au/futurestudents/apply-and-enrol" target="_blank">Apply and Enrol</a> page to find out how to apply for full-time, part-time or online courses. International students please visit <a href="http://www.tafeinternational.wa.edu.au" target="_blank">www.tafeinternational.wa.edu.au</a> For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study. For all other enquiries please call us on 1800 672 700 or email: <a href="mailto:info@crtafe.wa.edu.au">info@crtafe.wa.edu.au</a>. Please note: All enrolling students will require a Unique Student Identifier number. <h3>Disclaimer</h3> Courses at Central Regional TAFE are delivered subject to resources and demand. For the latest information, check with the appropriate campus, as course availability may be subject to review and change.

Print units tab

Units This course requires you to complete 10 units of competence. You are able to make some choices from the electives outlined below.1 Core Units <table class="overview" cellpadding="0"> <tr> <th scope="col">Unit Title</th> <th scope="col">National ID</th> <th scope="col">Unit of Study</th> </tr><tr><td>Assist with compliance with WHS laws</td><td>BSBWHS402</td><td>AUI25</td></tr> <tr><td>Assist with responding to incidents</td><td>BSBWHS406</td><td>AUK46</td></tr> <tr><td>Contribute to implementing and maintaining WHS consultation and participation processes</td><td>BSBWHS403</td><td>AUI30</td></tr> <tr><td>Contribute to implementing and maintaining WHS management systems</td><td>BSBWHS405</td><td>AUH35</td></tr> <tr><td>Contribute to WHS hazard identification, risk assessment and risk control</td><td>BSBWHS404</td><td>AUL09</td></tr> </table>2 Group A Elective Units <table class="overview" cellpadding="0"> <tr> <th scope="col">Unit Title</th> <th scope="col">National ID</th> <th scope="col">Unit of Study</th> </tr><tr><td>Assist with claims management, rehabilitation and return-to-work programs</td><td>BSBWHS407</td><td>AUM41</td></tr> <tr><td>Assist with effective WHS management of contractors</td><td>BSBWHS408</td><td>AUI03</td></tr> <tr><td>Assist with workplace monitoring processes</td><td>BSBWHS409</td><td>AUI93</td></tr> <tr><td>Contribute to work-related health and safety measures and initiatives</td><td>BSBWHS410</td><td>AUK21</td></tr> <tr><td>Ensure workplace emergency prevention procedures, systems and processes are implemented</td><td>PUAWER002B</td><td>D5573</td></tr> </table>3 Group B Elective Units <table class="overview" cellpadding="0"> <tr> <th scope="col">Unit Title</th> <th scope="col">National ID</th> <th scope="col">Unit of Study</th> </tr><tr><td>Make a presentation</td><td>BSBCMM401</td><td>AUI59</td></tr> <tr><td>Write complex documents</td><td>BSBWRT401</td><td>AUK28</td></tr> </table>

Generic info:

Page last updated February 20, 2019

Show slider overlay
Global contact number	1800 672 700
RTO code	52789
TEQSA code
Global email address	info@crtafe.wa.edu.au
facebook link	https://www.facebook.com/CentralRegionalTAFE/
Twitter link	https://twitter.com/CRTAFE
Instragram link	https://www.instagram.com/crtafewa/
LinkedIn	http://www.linkedin.com/company/1158925?trk=tyah&trkInfo=clickedVertical...
YouTube	https://www.youtube.com/channel/UCWUEw6LInaUdvd4VtCDyXFg
Google+
Semester: first block text	Available Semester 2
Semester: second block text	Available Semester 1

SEARCH COURSES

Contact us

Contact us

SEARCH COURSES

Certificate IV in Work Health and Safety

Entrance Requirements

Study pathway

Job opportunities

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Course Overview

Course enquiry

Course Overview

Disclaimer

Entrance Requirements

Disclaimer

Entrance Requirements

Disclaimer

Entrance Requirements

Qualification level

Global settings

Latest news